PVC High Speed Profile Extrusion Line

PVC High Speed Profile Extrusion Line

PVC High Speed Profile Extrusion Line

Application: YF series production line is designed for conical or parallel extrusion of PVC plastic window and door’s ,steel-plastic composit and decoration profile.

Properties and advantages: This line features stable Plasticization, high output,low sheering force,long life service and other advantages. The production line consists of control system, conical twin screw extruder or parallel twin screw extruder,extrusion die, calibration unit,haul off unit, film covering machine and stacker. The extruder is equipped with alternating-current inverter (ABB or Eurotherm drive), imported temperature controller (RKC,Japan). The calibration unit’s pump and haul off unit’s reducer are famous brand products. After simple changing of the die and screw, it also can produce the foam profiles.

Model YF240YF240YF240A
Max.width of product (mm)240240150*2
Extruder modelSJP75/28SJP93/28/31SJP110/28
Max.extrusion capacity (kg/h)150-250250-400400-500
 Extruder power (kw)375575
Cooling water (m3/h)7810
Compressed air (m3/min)0.60.60.8
Note: The information listed above is for reference only and can be customized according to customer requirements.


PVC异型材高速生产线.jpg

Swipe left and right for more
PVC Wood-Plastic Quick Assembling Board Extrusion Line

PVC Wood-Plastic Quick Assembling Board Extrusion Line

PVC Wood-Plastic Quick Assembling Board Extrusion Line

The machine is used for producing WPC decoration product, which is widely used in house and public decoration field, features non-polution, high lifetime, heat insulation, anti-fire, easy clean and maintanance, easy change and recycleable. It can be of high quality decoration material, ceiling, door frame, window frame, sound proof and heat insulation.

Production width (mm)180300/400600
Extruder typeSJZ51/105SJZ65/132SJZ80/156
Motor power (kw223755
TypeYF180YF300/400YF600
Output (kg/h)80-100150-200300-400
Cooling water (m3/h)678
 Compressor air (m3/min)0.60.60.6
Note: The information listed above is for reference only and can be customized according to customer requirements.


PVC木塑快装墙板生产线.jpg

Swipe left and right for more
PVC Single-screw WPC (foaming) Extrusion Line

PVC Single-screw WPC (foaming) Extrusion Line

PVC Single-screw WPC (foaming) Extrusion Line

The production line is mainly used for the production of the Great Wall panels, inner wall panels, partition walls, pinch plate, acoustic panels, stair handrail, window-shades,foot line and some decorative ecological wood products. The extruder with the unique screw design prevents raw material from high shear or over plasticizing. As a result, products gain significant texture of wood surface, and product with characteristics: no deformation, non-fading, fire prevention, anti-corrosion, anti-moth, anti-aging and anti-UV.

Production width (mm)108180240300
Extruder typeJWS45/25JWS65/25或JWS75/25JWS90/25JWS120/25
Motor power (kw1122/3037/4555
TypeYF108YF180YF240YF300
Output (kg/h)2050/7090150
Cooling water (m3/h)77/789
Compressor air (m3/min)0.50.6/0.60.80.8
Note: The information listed above is for reference only and can be customized according to customer requirements.

PVC单螺杆木塑(发泡)挤出生产线.jpg

Swipe left and right for more
PET/PLA Environmental Sheet Extrusion Line

PET/PLA Environmental Sheet Extrusion Line

PET/PLA Environmental Sheet Extrusion Line

PET/PLA environmental sheet extrusion line: JWELL develops the parallel twin screw extrusion line for PET/PLA sheet, this line equipped with degassing system, and no need drying and crystallizing unit. The extrusion line has the properties of low energy comsuption, simple production process and easy maintenance. The segmented screw structure can reduce the viscosity loss of PET/PLA resin, the symmetrical and thin-wall calender roller highten the cooling effect and improve the capactity and sheet quality. Multi components dosing feeder can control the percentage of virgin material, recycling material and master batch precisely, the sheet is widely used for thermoforming packaging industry.

ModeExtruder model Products thickness(mm)Max.extrusion capacity(kg/h)Main motor power(kw)
Multi layerJWE75/40+JWE52/40-10000.15-1.5500-600132/15
 Single layerJWE75/40-10000.15-1.5450-550160
Highly-efficientJWE95/44+JWE65/44-15000.15-1.51000-1200250/75
Note: The information listed above is for reference only and can be customized according to customer requirements.

PET、PLA环保片材生产线.jpg

Swipe left and right for more
Rigid PVC/WPC Door Board Extrusion Line

Rigid PVC/WPC Door Board Extrusion Line

Rigid PVC/WPC Door Board Extrusion Line

Performanc and advantages: 

The extruder of this extrusion line is the special designed SJZ92 conical twin-screw extruder, this extruder is equipped with the temperature controlling gauges which have the advantages of high precision temperature controlling, easy and reliable operation. The vacuum calibration table equipped with the strong cooling device which ensures the cooling effect. Caterpillar type haul off unit, equipped with the precise speed reduction motor and inverter, has the advantages of reasonable structure,powerful and stable haul off force. The cutter has the reliable and accurate cutting effect. The stacker has the movable stacking trolley and special made rubber protection layer to prevent the product from being scratched. The downstream equipment of this extrusion line uses the programmable computer or domestic made controlling system for stable and reliable operation.

TypeYF800YF1000YF1250
Max. width of product (mm)80010001250
Extruder typeSJZ 80/156SJZ 92/188SJZ 92/188
Max. extrusion capacity (kg/h)320450500
Extruder power (kw)55110132
Cooling water (m3/h)131518
Compressed air (m3/min)0.60.81
Note: The information listed above is for reference only and can be customized according to customer requirements.

PVC硬质、PVC木塑宽幅板材生产线.jpg

Swipe left and right for more
PP/PS Environmental Sheet Extrusion Line

PP/PS Environmental Sheet Extrusion Line

PP/PS Environmental Sheet Extrusion Line

Developed by Jwell company, this line is for producing multi-layer environmental-friendly sheet, which is widely used for vacuum forming, green food container and package, different kinds of food packaging container, such as: salver,bowl, canteen, fruit dish, etc. Adopting maxim talc percentage in the sheet production, either customer will be able to reduce the cost of the sheet or increase the sheet degration character as well as gaining good physical properties and further processing abilities.

ModelJWS150/120/90-1800JWS150/60-1200JWS130/60-1000JWS120-1000JWS100-800
Width1500mm1000mm900mm800mm600mm
 Thickness0.3-2mm0.3-2mm0.3-2mm0.2-2mm0.1-0.8mm
 Capacity1000-1200kg/h700-800kg/h550-600kg/h400-500kg/h300-350kg/h
Note: The information listed above is for reference only and can be customized according to customer requirements.

PP、PS环保片材生产线.jpg

Swipe left and right for more
PE&PP Wood-Plastic Floor Extrusion Line

PE&PP Wood-Plastic Floor Extrusion Line

PE&PP Wood-Plastic Floor Extrusion Line

PE&PP Wood-Plastic Floor is that the wood-plastic composite materials complete in different equipments of mixing, from play, extruding products, mixing the raw material in a certain formula, forming wood-plastic particles in the middle, and then squeezing out products. 

And nowadays, the two-step way is used currently, application of a wider general use dual-cone-or two-extruder extruder granulation, and then double-cone or single screw extruder extrusion products, mainly used in floor indoor or outdoor, parapets, tray, such as PE&PP plastic extrusion products.

ModelmmPower of main motor(KW)Output(kg/h
SJZ6565/13237150-180
SJZ7272/15245220-300
Note: The information listed above is for reference only and can be customized according to customer requirements.

PE&PP木塑地板挤出生产线.jpg

Swipe left and right for more
Stretch Film Extrusion Line

Stretch Film Extrusion Line

Stretch Film Extrusion Line

Stretch film production line is mainly used for PE lithium electric film; PP,PE breathable film; PP, PE, PET, PS thermo-shrinkage packing industrial. 

The equipment is composed by extruder, die head, sheet cast, lognitudinal stretch, transverse stretching, automatic winder and controlling system. Relying on our advanced designing and processing ability, our equipment’s features are:

● Special designed lognitudinal strech roller 

● Driving and controlling system are from world famous brand 

● Controlling system is from precision PLC program 

● High stretch acuracy, high speed, and steady working status 

We are able to design equipment as per customer’s request with high acuracy stretch equipment: 1-10 streching ratio, width range will be 500-3000mm, thickness range will be 0.05-0.3mm.

薄膜拉伸生产线.jpg

Swipe left and right for more
PS Foamed Picture Frame Extrusion Line

PS Foamed Picture Frame Extrusion Line

PS Foamed Picture Frame Extrusion Line

YF Series PS Foam Profile Extrusion Line, consists of single screw extruder and the special co-extruder, with the cooling water tank, hot stamping machine system, haul-off unit, and stacker. This line with imported ABB AC inverter control, imported RKC temperature meter etc. and features of good plasticization, high output capacity, and stable performance etc.The hot stamping machine system combined foreign technology, by the hot stamping embossing method, transfer the coating layer from the film to the PS foamed profile. The machine with good appearance, stable performance, accurate & easy operation. By adjust the embossing wheel the machine can work on various of different profiles. Working together with the main extruder and other extrusion down steam equipments, this line is popular as the latest developed producing line.

ModelYF1YF2YF3YF4
Extruder typeJWS65JWS90JWS100JWS120
Co-extruderJWS35JWS45JWS45JWS45
Products width3inch4inch5inch6-8inch
Hot stamping machine8组10组10组12组
 Speed2-6m/min2-6m/min2-6m/min2-6m/min
Note: The information listed above is for reference only and can be customized according to customer requirements.

PS塑料发泡镜框型材生产线.jpg

Swipe left and right for more
TPU High-low Temperature、High-elastic Film Co-extrusion Line

TPU High-low Temperature、High-elastic Film Co-extrusion Line

TPU High-low Temperature、High-elastic Film Co-extrusion Line

Features: TPU raw materials with different temperature and hardness ranges are extruded by two or three extruders at one time. Compared with the traditional composite process, it is more economical, more environmentally friendly and more efficient to recombine high-temperature and low-temperature thin films offline. Products are widely used in water-proof strips, shoes, clothing, bags, stationery, sports goods and so on.

ModelProducts width(mm)Products thickness(mm)Capacity(kg/h)
JWS90+JWS1001000-20000.02-0.5200-250
JWS90+JWS90+JWS901000-20000.02-0.5200-300
Note: The information listed above is for reference only and can be customized according to customer requirements.

TPU高低温薄膜、高弹膜生产线.jpg

Swipe left and right for more